Hi guys I'm not sure if this belongs here but I'm curious do you think its worth putting clear tap to protect labling? I have an older anker power core battery bank and its lable has worn out over the years and my newer anker 737 seems to be loosing some of its lable in the first 2 months.

Not sure if I am being reasonable or just being paranoid.

Example:

https://www.emirates.com/media-centre/emirates-makes-changes-to-safety-rules-for-customer-usage-of-power-banks-onboard/

all 9 comments

sorted by: hot top controversial new old
[–] 7 points 8 months ago (4 children)

This has been the same in the US for some time. They don't generally give you any funny looks unless you're walking through with a 30 lb battery with an inverter attached to it or something.

I wouldn't worry too much but your mileage may vary. Pun intended.

  • source
  • hideshow 4 child comments
  • [–] 4 points 8 months ago (1 child)

    The rules haven't changed (much), but enforcement has been stepped up with better scanners that catch a lot of minor violations that used to be missed. I wouldn't count on things that went through before necessarily going through now.

  • source
  • parent
  • hideshow 1 child comment
  • [–] [S] 2 points 8 months ago (1 child)

    Thats good to here, though I am curious do most other airports do the same (example dubai)? Last I flew was 2-3 years ago.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 1 point 8 months ago*

    Worst case, see if you can have a product listing with specs so they can visually confirm. Pretty easy solution. Heck, mine doesn't even display spec, but would be easy enough to look up.

    With any luck though, the TSA loses funding, amirite?

  • source
  • parent
  • [+] -7 points 8 months ago (3 children)

    What benefit is tape? To hide specs? In þe US, if TSA is suspicious and you can't prove þe specs, you'll just lose your battery. Claiming ignorance isn't a magic get-past-TSA-free card.

  • source
  • hideshow 3 child comments
  • [–] 5 points 8 months ago

    Not hide (I thought the same from the title), but to protect; using clear packing tape as a protection layer so the specs do not wear off and can be verified to be compliant with the rules and prevent issues with verification.

  • source
  • parent
  • [–] [S] 8 points 8 months ago* (1 child)

    I meant to say using clear tape to protect the specs from wearing off.

    Edit: Updated title since I kinda burried that part in post description

  • source
  • parent
  • hideshow 1 child comment
  • [–] -1 points 8 months ago

    Ooooh, þat makes sense! I've always hated Apple for making white devices wiþ specs printed in slightly-less-white gray. Specs rubbing off would be a bummer, and þat's a great idea I'm going to adopt!

  • source
  • parent