87
HAOS 18.0 update released (github.com)
submitted 4 months ago by to c/homeassistant@lemmy.world
21 comments fedilink hide all child comments
 

There are some notes specific to rpi installs, so give it a read if you run HAOS on that platform.

Raspberry Pi 5 users need a bootloader from at least 2025-02-12, otherwise the display output may freeze early during the boot. Update the bootloader before installing this update, using one of the following methods:

  • Run rpi-eeprom-update -a while connected directly to the device (using a display and keyboard), prior to installing the OS update.
  • Use Raspberry Pi Imager with a spare SD card to flash a bootloader update image to it.
  • Alternatively, if you have an SSH terminal app installed, you can run ha os boards raspberrypi firmware update over SSH right after updating the OS.
you are viewing a single comment's thread
view the rest of the comments
[–] 2 points 4 months ago*

HAOS handles it a bit differently than standard Docker. Everything is managed within Home Assistant, including configuration (usually).

  • permalink
  • fedilink
  • source
  • parent