[–] [S] 2 points 3 weeks ago

I don't have the energy or will. I usually take things like this apart to see what's going on. It's cheaper than a night out...

So I also have nothing to return. It's going into my e-cycle box that I dump at the eco-centre when it gets full.

  • source
  • parent
  • context
  • [–] 1 point 2 months ago

    Yep! Just adding anecdotally to your tests some thoughts that could help someone:

    1. Some cabinets are artificially mass loaded. Excess glue, scrap metal glued to the bottom, other scumbag stuff. There are badly made, nice sounding speakers; not many, and they don't hold up well over time.

    2. The woofer should make a very faint "woof", as it is pushing some air around. Be gentle with this test. Any rubbing, catching, or scratching - any material-on-material sounds - mean repair is needed. Repair can be pretty easy, and it's good to practice on beaters before you work on something you care about.

    3. Tweeters and dustcaps that have been punched in can be gently vacuumed back sometimes with a sock over the hoover wand and a careful approach. Doesn't always pan out.

    4. I got a power unit with dead cockroaches inside. It was destined for the landfill, so - ya know cleaned up garbage. Works fine now...

    5. Found pleasant sounding towers that rattled really badly, and had kid scribbles in black sharpie. I don't care about the marking, and the rattle ended up being a bunch of kids toys that were dropped in the port by a little scamp. Still in use with the toys removed, just had to reach in there and pull out the junk. Smell.... Just depends on your willingness to clean them up. Like the amplifier that had cat piss in it. It's garbage!

    6. Sometimes these won't turn on with a blown fuse. Usually easy to check them. If it's blown, a new fuse could fix it, but more likely indicative of a deeper electrical issue.

    Good hunting!

  • source
  • parent
  • context
  • [–] [S] 4 points 2 months ago (4 children)

    Everything's fine. My pre-purchase "tests" are

    1. Tapping the cabinets with my finger to see if it sounds hollow or solid and damped. This is without checking the model first, just a general test. The solider and quieter the thump sounds the better it is. You want an acoustically "dead" enclosure.

    2. State of the cones and surrounds, and tweeter. Tapping the woofer in the center gives you an idea of the bass, how smooth it moves, and any rubbing sounds. The surrounds need to be intact.

    3. Tweeters, if you can see them, generally just need to be shaped right, ie no kids pushed them in. (Which isn't always bad, they can be pulled back out but why bother)

    4. Do the ports have dead mice in them?

    5. Smell and cosmetics. Rattles.

    6. These are active speakers, so I tested to see if it turns on, if it makes a noise, is the volume pot scratchy.

    The only thing I missed is that one speaker is missing its adhesive feet. Beh. Whatever.

  • source
  • parent
  • context
  • [–] [S] 10 points 2 months ago (2 children)

    Eh, finally plugged them in, they work. Don't sound as nice and clear as my workhorse Creative T40s. But I paid full price for those...

  • source
  • [–] [S] 2 points 3 months ago (2 children)

    Turns out that, in many cases, there is a reason nice-looking items end up in the goodwill/trash. The unit keeps turning itself on and off, I suppose because of the lame keypad, the button is slightly indented and I guess makes a spurious contact.

  • source
  • [–] [S] 1 point 3 months ago

    Hilarious story!

    I already have a Starfrit scale, the one with the glass top. But it gets dirty on both sides and you can see it, but it's hard to reach under it. So that annoys me.

    I admit I bought it because I thought it looked good. But anything you weigh in a bowl it hides the readout. Dumb design I should have known better.

    So the scale I thrifted is overkill, it seems to have some kind of calorie calculator as well as a temperature readout. But hey, $7!

    The funny thing is I used to spend money like crazy. Now I earn more than ever and I've turned into a scrap hauler...

  • source
  • parent
  • context
  • [–] 4 points 3 months ago* (1 child)

    That thing looks awesome for less than $7.

    My kitchen scale boasts a rechargeable battery, a timer mode, and capacitive buttons that don't work if there's any moisture on it All for the low price of $245. (technically free for me though, because I stole it from the bar I worked in when I quit lol. I would never pay that much for a scale)

  • source
  • [–] 2 points 4 months ago

    I can't seem to find the display (as I remember it, anyway) but it looks like the joystick I'm remembering is the Flightstick Pro. So, likely less flashy, but IIRC, they also had the throttle for the left hand, too. Maybe it's more nostalgia than anything, since this would've been just after Top Gun or so, and I thought I was going to be a pilot.

  • source
  • parent
  • context
  • [–] 2 points 4 months ago

    There are filters. At least for countries. If you search for a specific place with country at default, it may be that you get no results, while you get results with a specific country. I guess there are also many other filters.

  • source
  • parent
  • context
  • [–] 2 points 4 months ago* (last edited 4 months ago) (1 child)

    There's a mish-mash of PS2, PC, and DB-15 connectors on there

    Sounds like that could be a hassle if it needs all that for a joystick. Maybe it was also part of a HOTAS and acts as the connecting hub for all the controllers, so you might get away with not plugging everything since you don't have those.

    Having a metal plate at the base is like level 0 of a decent joystick imo.. Even my X52, which basically cheaps out on all features, has that. Can't imagine how unstable it would be with a plastic part instead

    Edit : holy hell it looks like all these connections are actually for the joystick itself. Does it have a throttle ?

  • source
  • view more: next ›