Can't you add some exception for the Qobuz app, and let it use your real IP address(/Circumvent the VPN.) I mean there is no anonymity with a music streaming provider anyway, after you logged in to your account, and they even have your credit card number...
comments
oh it was running at 44k changed it(like 2 seconds ago) to 48 with no solution
i changed it back with no fix still
also i tried to make both to be 44100 but that gave me in the sound settings a flashing no mic is available error
44k has been standard for several decades, but not everything supports 48k. If this is what's causing your issues, you'll want everything to run 44k only on all audio devices liated.
I don't know if that will fix your problem, but it did fix mine.
so i tried searching and found this one
and weirdly enough my pc has the daemon.conf file and my laptop doesnt
in the (laptop)pulse/ has only client.conf and client.conf.d folder
also i have no clue what is the freq rate for this
the specs only have freq range
changed sample rate and tried to kill pulseaudio as outlined but it isnt running
so i changed the main rate to 48000 and alt is 44100
its a generic jack microphone (ill add specs here and on mint page)
i have tried connecting multiple mic with the same problem
i also tried connecting it to the back of the pc with similar results
and the other os thing is kinda hard to do due to limited space on drives
mic specs as written on box
freq range 35-18 hz
sensitivity -30db +/- 3db 0db=1v/pa, 1kz
connector 3.5 trrs connection
also wanna add its most like an os problem as b4 mint i used to run windows with microphones fine
I had a similar issue previously. The cause appeared to be that the sample rate of the microphone didn't match what the OS was expecting. The solution was to limit the sample rates that the microphone and the sound card were allowed to use.
I don't remember where to go to fix it, but I had to edit some config file and reboot, and then it worked fine.
What kind of mic is that? Do you connect it to a sound interface (like p2 plug), or does it have its own interface (like usb-c)? If the first case, have you tried connecting a different mic to the same interface, just to rule out any possible hardware problem? Have you tried the same machine, but with another os, just to check if it's specific a problem with mint?
If Steam is running in the background, it could be taking your controller input and remapping it to a keyboard and mouse input. You can quickly check by fully exiting Steam and seeing if your controller is detected correctly. If it is, you can try adding pcsx2 as a non-steam game like the other comment suggested (but then you would need to do this for every other non-steam game using a controller), or you could disable Steam Input for "Non-game controller layouts".
With your controller connected, open steam in the upper left, and open to Settings > Controller > Desktop Layout > Edit. From there, disable Steam Input, and see if PCSX2 starts detecting your controller as a controller instead of a mouse and keyboard.
Maybe use the defaults in pcsx2 and edit the button map in steam input? Kind of clunky but might work
That seems to work. Any advice on if I wanted to play Ratchet and Clank as far as gamepad layout goes? Editing seems off and the presets don't make sense or don't work. Thank you!
Try launching pcsx2 via steam so you can use steam input? Like just add pcsx2 as a non-steam game. I’ve done that for all sorts of games and emulators to get around control issues. Good luck!
I use ubo.
I remember seeing a post several months ago about how Copilot being enabled in MS programs caused horrible slowdowns (with some speculation that it was sending data to MS servers and waiting for responses). That might be something to look into if you're allowed to disable Copilot at all
Like the other commenter said, try pressing F5, or right-click the empty space in a folder and click "refresh". The file is likely there, but sometimes Explorer just doesn't update immediately for whatever reason.
Is there an open-source file format for print? PDFs are still so widely used because they're the only format (that I'm aware of) where you can take what you see on your screen, send it to someone else, and it will look/print exactly the same way. I'd love it if there was an equivalent FOSS option that I didn't need a pirated Adobe Acrobat to edit effectively.
May just be file system view needs a refresh. I see this all the time. Hit F5 on the Explorer view to force a refresh.
Only ever takes me seconds to create a PDF (when I do it, which is rarely).
You could also save it in an old version of Word - pretty much any app can read versions like Word 97 these days, or choose another (open) document format.
Friends don't let friends voluntarily use PDF.
Maybe this is the time to just remove a tech platform from your life rather than replace it. I've rarely talked to anyone that misses these addictions once they stay off for more than 6months. Probably not what you are looking for here, but consider it if feasible.
I played around with it a little while ago and it seems like a really strong contender to me. Open source, and basically clones the entire Discord UX, so your less technical friends will have a very easy adjustment. You can create servers and rooms like you'd expect, there's voice chat, private messaging, etc.
I tried signing up around noon today and got the invite link (expired) hours later, looks like they can't handle the influx from discord leavers 😅 (somehow both a good and a bad sign I guess)
Formerly known as Revolt.
It looks like a strong contender to me.
If just for group chats, Signal or SimpleX?
In another post I saw last night someone mentioned https://stoat.chat/ - I know nothing about it, but at first glance it looks okay. No time to play with it yet, tho.
Same here, and i've tried other browsers which hasn't helped. Do you use adaway?
You're amazing. Thanks.
If your CMOS utilities have it, go check the voltages.
You can also run through some of these and see if you can catch anything acting weird: https://www.baeldung.com/linux/power-supply-psu-information
Also, check the nvidia-smi output and see if anything looks weird there. Check out this cheat sheet.
You should be able to run something like: nvidia-smi --query-gpu=power.draw --format=csv --loop-ms=1000 and get some readings