I think what you're looking for is called XUM1541-Adapter. But I'm not a C64 expert by any means.
comments
I tried to join Lemmy.Palestine
Lemmy.Palestine does not exists. Is it https://lemmy.world/c/palestine?
The router has a DNS configured and works with all other devices.
I'm not sure what this means. You mean that you have multiple devices, and you've set multiple of them up to use 192.168.1.1 as a DNS server, and some work and some don't? Or you just mean that the other devices work in that they can access the Internet, and aren't using 192.168.1.1 as a DNS server?
If you've got a Linux system, the basic tools I'd probably use as a first pass are dig, which is a utility that provides a fair bit of information about what's going on, bypasses your system resolver, and is often used for diagnosing DNS issues, and tcpdump, which will let you see what is going by at the network level. On Debian-family systems, dig is in the package bind9-dnsutils, and tcpdump is in the tcpdump package.
In one terminal:
$ sudo tcpdump udp port 53 and host 192.168.1.1
That'll start printing a summary of DNS traffic to and from the Linux box and the router.
In another:
$ dig www.google.com @192.168.1.1
That'll let you see if the query is timing out or what-all is going wrong, and it'll ensure that you don't have some client-side configuration issue, since you aren't using your system resolver.
Yup that's partly why I just went to the vendor website before that, I heard about those attacks a week or two ago and removed a lot of my old AUR packages until I figured out what was safe to use. I try to avoid AUR as much as possible now.
Me being a newbie to linux means AUR is a death trap and isn't a viable option for me. I've been learning a lot but sadly I don't know how to program or understand the code yet when reading the PKG Builds to verify if it's not malicious or not. Just the looking for npm or weird downloads part lol
Ideally I would love if I could simply get all my programs from my package manager, but it seems like it's not always that simple and is missing quite a bit of programs on pacman. That's likely why people get viruses from AUR in the first place, since the program they wanted can't be found in pacman, they immediately go running straight to AUR as it's usually just one tab click over on things like cachyos's package manager for example.
Somehow I missed the AUR part. AUR is currently suffering from several attacks. Packages from there should always be checked. But rarely are.
Thanks for the tip, I do normally do that as a first instinct when installing things. However, Megasync wasn't on the official cachyos repo for me like many things I end up looking for :( So I had to check the vendors website to see if it was even available on Linux at all.
Perhaps I should have just checked the AUR repository or installed it via a different method instead of doing all that beforehand. I admit it's my fault for not looking up what wget even was at first lol
General Linux advice is to not install something from the vendor's homepage but using your distribution's own methods.
Only go the vendor's route if you are encountering bugs or need a feature not present in the version shipped by your distribution.
Thank you so much!
It's not down.
Thedude said somewhere that it's apps only. The site works fine via browser. Something about being hit really hard or something, I don't remember the details.
But, yeah, if you want to use sjw on mobile, it'll be in browser for a couple of days. Otherwise, break out an alt account
Just open a terminal and update the database.
$ sudo pacman -Syy
Then install it from aur instead of wget it.
$ paru -S megasync-bin
Cloudflare gave me a 502 error.
So either the server is goofed or there is an issue between the server and the internet.
Up for me, your URL isnt quite right though: https://sh.itjust.works/
Edit: does seem a bit flakey though.
Maybe they are getting DDOS'd, I can now get an Anubis screen, but its broken.
As far as I understand, Windows needs Odin and Linux uses Heimdall. When I realised this, I got curious about a more Linux -specific guide.
It's been a while since I experimented with /e/, but flashing is flashing - you just need ADB and the phone image files (zip).
Unless /e/ has a Windows-specific tool these days?
Update: thank you all for your detailed and kind input! I finally tried crimping on an 8P8C connector onto an Ethernet cable. I failed. Miserably. But at least I finally learned what’s actually happening - or what’s supposed to happen: the teeth of the connector actually puncture the individual wires in order to make contact with the conductors inside. Sic. But omg is it a game of patience. 🤣
Since you've already received plenty of helpful advice, I'll just add that I find it helpful to untwist the pairs from the middle out, putting them into place, starting with blue and white/blue (I do not do this professionally, but have done this a little bit). Maybe someone else has a differing opinion.
EDIT: I should mention that I tend to arrange each pair roughly where they need to go before untwisting them.
Passthru lets you push the wires all the way through the plug. With a compatible crimp tool, it will lock in the wires and trim off the excess in one go. This lets you push the jacket as far into the plug as possible, so it has a good, secure grip on the cable when crimped.
If you don't have a compatible tool, just a normal rj45 crimper, you can push the wires all the way through, cut the excess as far back as it allows, then carefully pullback until the wires are flush with the end and not sticking out - it's important they don't stick out or you could short things in some cases. You also have to be more careful to make sure the wires are correctly at the end of the plug and not too far in or out when you put it in the crimper - it will inevitably over or undershoot with a passthru if you don't have the right tool.
Some say the traditional rj45 is better, some say the passthru is better.
Also, never crimp with the other end plugged into anything.
No worries at all! 😊 I appreciate the intention!!!
So, I did record something real quick before lunch, but now I got no clue where to upload it other than YouTube. Don’t really want to put myself out there like that lol. It’s just a quick recording and I’m not used to doing that kinda thing
Pretty much everything you need
No problem. I've done a few hundred of them.
Thanks! This was really easy to understand! I'll give it a go sometime this week. 😊
Crimping cables is pretty easy once you get the hang of it.
I don't use our advocate pass-through ends for 2 reasons. One is they cost more. Two they allow easier moisture ingress which can cause signal issues.
Use a tool to strip about 2 inches of the outer jacket away. Separate the conductors into individual wires and remove anything else, if the cable has a plastic separator pull it while holding the cable jacket, I usually try to pull out till it stretches to around 6 inches, then squeeze the jacket and clip it off as close to the wires as possible. When you release the pressure the plastic separator will pull back into the jacket. You may have to fold the wires out of the way.
Check the color code on the opposite end. It will be either TIA/EIA A or B

Untwist the pairs and then grab the jacket with one hand and the wires with the other using your thumb and the side of your index finger and pull the wires through while rocking your hand back a few inches. After a couple passes the wires will straighten out. Make your wires lay out according to the color code and given them another pull or two to get them straight. The whole time you should be keeping pressure on the jacket so the wires don't move or shift.
Make sure you have your crimper and end handy. Move your grip about an inch from the end of the jacket. Get everything laid out and adjusted. Grab the rj45 and set it at the end of the jacket where the end of the wires land is where you will want to cut the wires off. Once the wires are cut slip the connector on and check that a wire didn't shift. All the wires should press against the end of the connector on the issue. Once they are set and you are happy with the connection crimp the end on.
A couple tips.
You can compress or stretch the jacket, not the wires.
You truthfully want the jacket to slip into the base of the RJ45 so that when you crimp the little plastic clip bites on to it.
Pulling the wires to straighten them can be a pain, just work it. Sometimes a side to side movement while pulling can help.
If your finger starts to hurt you can try a pencil or a piece of plastic as a guard. After 10 or 15 ends it probably will be sore.
Practice makes progress. Unless you’re doing a lot, just buy one made to your needs. It’ll be more reliable. I usually just spool mine up unless it’s egregiously long.
I’ve heard that the pass through terminations are suboptimal for PoE applications and outdoor use, but they’re certainly easier to use.
You really should buy outdoor cable if you’re using it outdoors, and don’t be an idiot like me and buy a spool of direct burial unshielded cable and then use it up towers. (So far so good, but it irks me that it’s the “wrong” cable and I worry about lightning).
You need to get the right connectors for the cable you’re using - cat6 connectors are not the same as cat5.
When you can’t get it to sync faster than 100mbps then it’s your bad termination.
It's just a special type of connector plug that lets the wires slide through if you want to see the wires come out the front. I just used clear connectors to check the color ordering