[–] 4 points 1 month ago (3 children)

I always called them spindles or gears.

Anyway, you can test this by running it without a cassette in it. As others have pointed out, one side pulls and the other is idle.

I kinda miss tapes. K-Pop groups still release them. They are not cheap.

  • source
  • [–] 3 points 1 month ago*

    If only one drives the take it won't rewind. For rewinding the A side you have flip the tape and go full forward on the other side. If both sides have "traction" you can reverse and go firward freely.

  • source
  • [–] 15 points 1 month ago (3 children)

    Only one of the spindles will be active at a time, the one collecting the tape from the other, if the player has an auto reverse mechanism it'll switch between them, if not, it'll just be the one

    If you were curious, there's also a capstan and pinch roller that you won't be able to see that is responsible for holding the tape onto the tape head and moving it along, so it's not tension from the collecting spindle that is dragging the tape through everything.

  • source
  • [–] 2 points 1 month ago

    It's been a long time since I used one of these. But back in the day I had multiple 'walkman' style cassette players (one Sony, one Pioneer, one JVC, and over it two others I think). And from what I recall, they almost all only drove from one of the two spindles.

  • source
  • [–] 10 points 1 month ago* (5 children)

    There's no need to fix it since the tape is recorded the same way it's played.

    Like a vinyl record, the grooves towards the outside of the platter are moving faster than the grooves on the inside yet it spins at a constant RPM.

    One advantage of analog is that there's no constant "bitrate" that has to be maintained though faster moving analog media generally translates to higher fidelity.

  • source
  • parent
  • context
  • [–] [S] 4 points 1 month ago (6 children)

    Sic! I had never thought of that! Does the winding/spooling speed of the driving side change to account for the change in radius?! How is that solved mechanically? Pressure plates that "feel" the size of the spool? 🤯 Or is that just the case if it had two drives?

  • source
  • parent
  • context
  • [–] 22 points 1 month ago* (7 children)

    I don't have a cassette player around, but I'd think that it'd be extremely difficult to have a motor drive the unspooling side concurrently, because the ratio at which you'd need to drive the two gears would change over the span of the tape due to the size of each spooled-up tape radius changing. And tapes aren't standardized in length, so it's not like the tape player—even if it had a way to know where it was in a tape when you inserted it, which it doesn't—would really have a way of knowing that ratio.

  • source
  • [–] 4 points 1 month ago* (1 child)

    Yes. But you're holding it upside down. Normally the right one pulls the tape through the head. The logic goes that it reduces the number of components in the build, and if there is a problem you don't want the trailing spool continuing to push tape into the mechanism.

    In an auto reverse deck the active one will stop and the idle one will start. That pulls the tape through in the opposite direction to read the second track. In a normal deck you'd flip the tape around because it only pulls in one direction.

    Edited: I looked at the pic and saw that your tape goes in upside down.

  • source
  • [–] 2 points 1 month ago (2 children)

    Both of those are Apple's own infrastructure (aaplimg.com is Apple's CDN/edge domain), so it isn't a third party phoning home. The "apay-cash" part suggests the Apple Cash / Wallet side doing a periodic device check-in, which can happen as long as Wallet/Apple Pay is set up on the device, even if you don't actively use Apple Cash.

    If you want to know which feature triggers it, NextDNS makes that easy: block just that domain for a day and see what breaks (card refresh in Wallet, Apple Cash balance, transit cards). If nothing you use breaks, you can leave it blocked; if Wallet starts complaining, you know what it was for.

    Hope you feel better soon.

  • source
  • [–] [S] 1 point 1 month ago* (last edited 1 month ago)

    Thanks so much for the valuable input! 😊 It's already on pretty "airy" stand ( https://www.kjell.com/se/produkter/kontor/hemmakontor/laptopstall/plexgear-laptopstall-i-aluminium-p62630 ) and I regularly use compressed air to clean it. Once a year, I even open it up for cleaning. 😁 As for the player, I use mpv with the switch --hwdec=vaapi to enable hardware decoding, but it's an old T480 which I upgraded with 32GB RAM and a 1TB m.2 SSD. I'll check CPU usage later.

  • source
  • parent
  • context
  • [–] 2 points 1 month ago (1 child)

    Before buying one, a couple of checks that often help more than the pad itself:

    1. Find where the air goes in. Flip the laptop over: most draw air through vents on the bottom and blow out the back or side. A pad only does much if its fan sits under the intake grille, so match the fan layout to your vents rather than buying the biggest one. Even just raising the back edge by a couple of centimetres (a pad or a book) improves intake a lot.
    2. Clean the vents and fan. Dust on the heatsink fins is the usual cause of a laptop getting louder over time. Compressed air through the vents in short bursts, holding the fan still so it doesn't over-spin.
    3. Check the video player isn't decoding in software. If the fan only screams on heavier video files, that's often a codec your GPU can't decode (e.g. AV1 or HEVC 10-bit on older hardware) or a player with hardware decoding switched off. Watch CPU usage while it plays; if one or more cores are pegged, try enabling hardware decoding (in VLC or mpv it's a setting) or a different player. That can cut the heat far more than a pad.
  • source
  • [–] [S] 1 point 1 month ago (1 child)

    Thanks! By "this type of tape", do you mean "type I" as refered to in the screenshot? Nevertheless, I have cancelled the order and decided to keep hunting for an old player. If it'll just need new drive belts, those I can replace by myself, I think. ˆˆ

  • source
  • parent
  • context
  • view more: ‹ prev next ›