6
Random resets after cpu+GPU upgrade (Arch) (lemmy.world)
submitted 3 months ago by to c/linuxquestions@lemmy.zip
13 comments fedilink hide all child comments
 

Upgraded to amd 5900xt & 7090xt and am experiencing random crashes. No overclock, no xmp/docp, no pbo (not defaults cause Asus has pbo on by default). 1000w seasonic PSU.

Whole screen goes green and reboots. Happens in heavy gaming, watching YouTube and even at idle.

Journalctl lists an mc5 hardware error suggests the cpu, but none of the troubleshooting has fixed it.

BIOS updated, c-states disabled, triple checked all settings, fully up to date Arch, but still randomly crashes.

Where do I go from here?

you are viewing a single comment's thread
view the rest of the comments
[–] 4 points 3 months ago (3 children)

What motherboard? The 5900x and 5950x are pretty power hungry CPUs and low end boards might not play well with them.

  • permalink
  • fedilink
  • source
  • hideshow 3 child comments
    •
  • [–] [S] 3 points 3 months ago* (2 children)

    Tuf b550-m (no Wi-Fi), not low end, but certainly not top tier

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 3 points 3 months ago* (last edited 3 months ago) (1 child)

    Is this the board? The VRM situation looks pretty dire, but I wouldn't think that'd be an actual problem. Also why do you have C states disabled? That's not going to be helping your VRM situation.

    Also what does your CPU cooling situation look like? Do you have a tower cooler that blows air over the VRM, or water cooling that leaves the VRM baking? Also generally for best performance you'd want xmp/docp/whatever the other thing is turned on. It's free performance if your RAM supports it.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] [S] 2 points 3 months ago

    Yep, that's the mobo. C states disabled as that was the advice given on arch forums. Apparently dialing c states is supposed to prevent the os from going into low power mode then crashing when voltage sags.

    Cooler is noctua nhd15 with ptm7950, never been above 75c even in stress tests. Second fan on the cooler is as low as possible to blow over the vrm heat sync close to rear i/o.

    Literally all of the advice for crashes says to disable xmp/docp. At the moment performance isn't the concern, it's the crashes

  • permalink
  • fedilink
  • source
  • parent