29
The used OnePlus 6 I bought is stuck on a black screen, detected as "Qualcomm CDMA Technologies MSM QUSB_BULK_CID:0402_SN:B48453B9" (sopuli.xyz)
submitted 5 months ago by to c/linuxphones@lemmy.ca
9 comments fedilink hide all child comments
 

Holding down the power button, the power button + volume up, and the power button + both volume buttons does not do anything. What does "Qualcomm CDMA Technologies MSM QUSB_BULK_CID:0402_SN:B48453B9" mean?

I followed the guide using a prebuilt postmarketOS image (v25.12 w/ Phosh). I ran fastboot erase dtbo, fastboot flash boot (.img file), fastboot flash userdata (another .img file), and finally fastboot reboot. I saw a few Tux penguins in the corner and saw the postmarketOS logo. Then, the display turned off. After that, I rebooted in fastboot mode and retried the fastboot flash step and did fastboot reboot. Now my device seems to be unresponsive and appears as "Qualcomm CDMA Technologies MSM QUSB_BULK_CID:0402_SN:B48453B9" (in Android, it was seen as "OnePlus 6", while in fastboot mode, it was seen as "Google Android device")

Has anyone ran into this issue and know how to fix this?

edit: I did unlock the bootloader using "fastboot oem unlock" before flashing anything

you are viewing a single comment's thread
view the rest of the comments
[–] 5 points 5 months ago (5 children)

I think you need the MSM Download Tool to reflash your phone to stock and start over

  • permalink
  • fedilink
  • source
  • hideshow 5 child comments
    •
  • [–] [S] 1 point 5 months ago (3 children)

    That seems to be Windows exclusive, and Wine doesn't work with it

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 3 child comments
    •
  • [–] 3 points 5 months ago (2 children)

    if you need to use any of qualcomm tools, you should install win7 or 10 in a vm. these are mostly leaked internal tools and there's usually no foss equivalent sadly

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •