46
Destroyed my Glass Print Bed - What to do now (lemmy.zip)
submitted 1 year ago by to c/3dprinting@lemmy.world
30 comments fedilink hide all child comments
 

I was printing some ABS on my modified Anycubic I3 Mega overnight, when I awoke to this horror of a destroyed glass print bed...

Now the question remains, how to actually fix this? One part is still firmly attached to the Bed and I fear this may destroy the Bed even more.

And I obviously need a new Print bed, but I can't find the exact replacement, so should I even get a replacement Ultrabase? I saw that there are magnetic PEI beds available, but I am unsure if it is worth the 80-100€ for this.

Edit: Since the glass is glued to the 1.5mm aluminium heater PCB (and I already had to resolder the broken off wires once) I was looking at complete replacements at first, which why the price is relatively high

you are viewing a single comment's thread
view the rest of the comments
[–] 3 points 1 year ago (1 child)

Just get the $25 magnetic sheet and PEI plate, and slap them both on there. If you do go the route of a new aluminum bed, you can heat this bed up to 80 or 90C and then peel the heat pad off of it and stick it onto your new bed. I did both these on my old Sidewinder X2 but didn't notice much benefit to the aluminum bed (the OEM glass bed was slightly warped and concave), so I didn't find it worth the money to be honest. I think it's worth trying in stages since you're not really out any money if you decide the simpler and cheaper solution doesn't cut it.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] [S] 2 points 1 year ago

    Yes that was my idea, I already ordered a magnetic plate kit today and I can try this out first. Since the heater is an aluminum PCB directly glued to the glass I might just try to separate the glass from the PCB if the glass if sticking it on top doesn't work out like I wanted

  • permalink
  • fedilink
  • source
  • parent