you are viewing a single comment's thread
view the rest of the comments
[+] 29 points 1 year ago* (8 children)
  • [–] 12 points 1 year ago* (1 child)

    You should be able to pick up an old style timer plug for under 10 euro / USD in your hardware store.

    They're a tiny bit fiddly to set up but given how power hungry those things are you'll be saving money in no time.

    We have one around here somewhere. I'll see if I can dig you out a picture.

    Internet was faster....

  • source
  • parent
  • hideshow 1 child comment
  • [–] 4 points 1 year ago* (last edited 1 year ago)

    These timers have no concept of understanding if the air is too humid.

    They want a cooldown period so the unit isn't cycling constantly.

    eg. turning on and off 30 times in an hour because the sensor triggers the moment it see's 46% when it's set to 45.

    They want it so that it triggers on pull humidity down to 45%, wait an hour no matter what then trigger the next time it sees 46% or greater, which could be immediately... or in 5 more hours.

    A pure timer wouldn't get the same effect at all.

    Best answer I can think of off hand would be Home Assistant related. Get a humidity sensor and a z-wave switch/outlet. Use a dumb dehumifier that turns on as long as it has power...

    On humidity sensor change check if above 45%. If it is, turn on power. wait until below 45% again... turn power off then wait 60 minutes. Make sure automation is set to not run concurrently, that way the currently running automation script must complete it's 60 minutes cooldown before it can run again

  • source
  • parent
  • [–] 1 point 1 year ago

    If you are running an AC, you might be able modify it to reduce the humidity.

    AC units naturally dehumidify (as TC points out, they are essentially the same thing as traditional dehumidifiers). However, the amount of moisture they pull out is mostly related to how long they are running, not how cold they can get. This means that if you have an overpowered AC, you get less dehumidifying effect because the AC is on less.

    Some ACs let you reduce their power, which will increase their duty cycle and increase the amount of water they pull out of the air. It also helps improve their lifespan as they need to cycle less.

  • source
  • parent
  • [–] 1 point 1 year ago*

    Hoping someday someone figures out how to build a more efficient one

    Some material, that catches water atoms via static charge, until it drips down, making room for more, maybe? Can't think of a more efficient catch & release cycle.

  • source
  • parent