[–] 4 points 3 months ago

yeah people have covered it well but its pretty much about the tools. Back before they had the little plastic guides it was kinda challenging but now its pretty simple if you have the tools.

  • source
  • [–] 6 points 3 months ago* (3 children)

    Yeah those work. Your stripper has a cutter on it which will work. I forget about those. Some even have a notch to help you strip your jacket without nicking your wires. I just use snips. Don’t use paper scissors

    Also if you need I can record a short video showing my steps later.

    ❤️ 1
  • source
  • parent
  • context
  • [–] 14 points 3 months ago* (last edited 3 months ago) (5 children)

    Guides? Idk. But I can tell you?

    Tools needed:

    Standard Crimper [1] [2]

    OR

    Pass-through Crimper [1]

    Standard RJ45 Heads [1]

    Pass-through RJ45 Heads [1]

    Cable tester [1]

    Snips (Optional) [1] [2] [3]

    Some crimpers have a blade for cutting the sheath off cables and trimming pairs, so snips aren’t strictly necessary, tho I prefer them.

    On tools, depends on how often you plan to use them. If once in a blue moon, just buy Greenlee. If often, Klein or Milwaukee. I love my Klein snips, but coworker has the Milwaukee ones and I gotta say they’re pretty nice. For crimpers you’ve got two styles to pick from, standard or pass through. Pass throughs tbh are my preference because nothing is more frustrating than checking your head thinking it looks right, only for it to fail a test. Pass-throughs are just easier to inspect, but costlier so if you plan to do it often the cost difference is worth the time and frustration. Also I like the passthrough crimper because it has a nice cheat sheet on it on both sides so it orients to the way your cable head is facing.

    Note: DO NOT use standard heads on a pass through crimper. There’s a little nub at the end the blade will attempt to cut. DO NOT use pass-through heads with a standard crimper and just use scissors or flush cutters to trim the ends. If you do this, so help me I WILL PERSONALLY COME FIND YOU.

    Last bit of advice: just buy a cable that fits your length if that’s an option rather than spend money on tools unless you’re going to do it often or your pulling long runs of cable to do your house (tho never use RJ45 heads for stuff unless you’re doing cameras. It’s better to punch onto keystones).

    Step 1: cut the head off your cable with your snips

    Step 2: about an inch down the cable use your snips to gently score the cable by closing the snips on the cable, lightly, and rotating the snips around the cable.

    Step 3: grab the end of the cable and break the jacket using your hands like you’re breaking a stick. If the jacket is rubbery you may need to score it a bit deeper.

    Step 4: Check the pairs after removing the jacket to ensure you didn’t accidentally cut deep enough to score the data wires. If you did repeat step 2 and 3.

    Step 5: untwist the pairs and fan them out. Align them so they are in the following order (T568B) (Nobody uses T568A unless you’re doing work for the government, and there’s no reason to use it. All premade cables you buy will be T568B. Technically as long as both ends match the cable will work tho)

    • White/Orange
    • Orange/White
    • White/Green
    • Blue/White
    • White/Blue
    • Green/White
    • White/Brown
    • Brown/White

    Note: the correct way to refer to it is as above (first color is dominant color), but in my head I read it:

    • Orange Stripe
    • Orange
    • Green Stripe
    • Blue
    • Blue Stripe
    • Green
    • Brown Stripe
    • Brown

    Step 6: grab fanned out pairs with your fingers and straighten them out as best as possible, checking that they stay in the correct order.

    Step 7: if using standard RJ45 heads, use snips to shorten your pairs to 1/4” making as straight a cut as possible. If using pass-throughs cut to half an inch straight across.

    Step 8: Face the jack head with the tab facing down and slowly and gently insert your wires making sure to watch that they stay in the correct order. Check your work by looking at the wires through the clear head. If using a standard head you want to make sure the wires are all the way to the back of the head as much as possible and are in the correct order. If they shifted, remove the wires, straighten them out again and trim if needed and try again. If using pass-throughs it’s easier to check your work here.

    Step 9: if satisfied that they appear correct insert the head into your crimper and racket the tool completely closed. The pass through crimper will trim the ends.

    Step 10: test the cable with your tester, if it passes you’re good to go. If it fails start over with step 1.

  • source
  • [–] 5 points 3 months ago* (last edited 3 months ago) (2 children)

    There's probably some ICT guys out there that have a better way of doing it and can do it faster since they do it more often.

    First pick the color pattern you need, you can Google it, I don't think it matters much anymore but there's A, B, and A/B.

    I don't use the cripple tool to strip because I'm more comfortable with electrical stippers. I score the the outer jacket to get to the string, then pull the string back about a two inches. Then cut the wire off where I scored the jacket and cut the excess jacket off.

    Untwist the individual wires. Now depending on the the type of connector you purchased will determine the next step. If you got the push through connectors then you are a savage and you should be ashamed of yourself. If you got the traditional connectors then arrange the colors on the pattern you chose. Take something hard and round, I use my stripper handle to pull the wire across the handle while kind of shaking the wire to straighten out the strands. Edit - Arrange the wire as tightly as possible in the pattern you chose. Then cut the wire at about half inch (maybe a little less) from the jacket as straight as possible, if the wire was pulled tight and straight the strands should stay in place.

    Pay attention to your color pattern and if the chart you used is looking from the top or underneath the connector, most charts should be from under the connector. Slide the strands through the connector and make sure they all fit into the proper channels of the connector and slide all of the way to the of the connector.

    If you're left handed then this part kind of sucks because 99% are made for right handed people. If everything lines up then push the connector into the cripple tool with jostling the wires and connect too much. Squeeze the cripple tool and then repeat for the other end.

    Put a rj45 continuity tester on the cable to make sure you have cripped it properly and you're done.

  • source
  • [–] [S] 1 point 3 months ago

    Thank you so much. I think it is mostly that a lot of people just link an article, without creating an actual post. I am slowly figuring out how to use it. Currently also trying to log into Lemoa on my Fedora machine. Let's see whether that works.

  • source
  • parent
  • context
  • [–] 1 point 3 months ago (1 child)

    Hi there, scribas, with the default web ui, if you're seeing comments after clicking to the post page, you should just be able to use your mousewheel to scroll up to the post content. If it's behaving differently than that, could we get a screenshot of what your page looks like with those two clicks you're describing?

    Lemmy is a relatively new platform and lacks many of the customization features you've come to expect but is under active development so things improve at a relatively quick pace. If it bothers you enough and you don't want to wait, one option to try is moving to a Piefed instance, as it is generally a bit more refined in it's features and user interface.

  • source
  • [–] 4 points 3 months ago

    Look up your carriers email for txting.

    For example: Common gateways: number@txt.att.net number@vtext.com number@tmomail.net number@messaging.sprintpcs.com

    Then you send an email from your desktop computer and it arrives on the mobile device AA a txt message.

  • source
  • [–] 2 points 3 months ago

    I have a bit of a setup; but it's worked reliably for years at this point: 1) matrix-synapse; 2) https://github.com/mautrix/imessage.git running on an old iMac ; 3) native matrix client on android, iphone, desktop and element-web. The old imac that i've been running the bridge on has been pretty solid, i imagine if you can get a VM successfully booted, it could also work.

  • source
  • [–] 1 point 3 months ago

    Odd, as you are on fedora, a wild guess is teams might use DRM or a nonfree audio codec like eac3 (and afaik aac too, which is sadly the standard for many things).

    Try installing libavcodec-freeworld from rpmfusion or better use their approach to replace ffmpeg with the full variant and install the freeworld codecs.

  • source
  • parent
  • context
  • view more: ‹ prev next ›