you are viewing a single comment's thread
view the rest of the comments
[–] 25 points 3 months ago (16 children)

It's time for electronic weaponry to hit mass production. EMP gun tech can be refined and perfected outside of official labs these days.

  • source
  • hideshow 16 child comments
  • [–] 21 points 3 months ago (2 children)

    I wonder how well these spy devices would hold up if someone connected a horn antenna to an industrial magnetron and blasted them with 10-20 kW of RF?

  • source
  • parent
  • hideshow 2 child comments
  • [–] 12 points 3 months ago (7 children)

    I mean, you can build one yourself, but a real damaging version would require a lot of power.

    Unfortunately due to the inverse square law, they don't have a very long range.

    I guess a phased array emp would be the best way to do it.

    Not easily done with the DIY hacky way of doing it with a coil and teaser generator, but I'm sure with some decent mosfets and transformers, it should be possible.

  • source
  • parent
  • hideshow 7 child comments
  • [–] 7 points 3 months ago

    Unfortunately due to the inverse square law, they don't have a very long range.

    Possibly for the better. Last thing you need is people accidentally hitting a plane with one of them.

    People already do it with lasers. Something that destroys the electronics would be even worse.

  • source
  • parent
  • [–] 7 points 3 months ago (5 children)

    would it not be enabled by putting it on the end of a long stick?

  • source
  • parent
  • hideshow 5 child comments
  • [–] 3 points 3 months ago (2 children)
  • [–] 4 points 3 months ago* (3 children)

    How? I've been trying my best to find a DIY EMP, and AFAICT, none of the ones that are easy to find blueprints or instructions to build actually create an EMP. They just short out spectacularly.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 3 points 3 months ago* (last edited 3 months ago)

    I posted one above, however given the height of many of these installations, I think the common piezo+coil demo mounted on either a telescopic floodlight bulb changing pole or a payload drone modified to shield the controller board (otherwise plan to replace the boards) would be simpler safer and cheaper.

    Edit: actually since it’s a drone you can just suspend the coil by a string and rely on inverse square for shielding. Much lighter. Cheaper drone or stronger pulse.

  • source
  • parent