295
The "standard" car charger is usually overkill—but your electrician might not know that [32:26] (www.youtube.com)
submitted 1 year ago by to c/technology@lemmy.world
98 comments fedilink hide all child comments
you are viewing a single comment's thread
view the rest of the comments
[–] 3 points 1 year ago (2 children)

Changing a 120v line over to 240 is likely also against code even if the physical cable can handle it. 120V cable is typically white/black/green, and the electrical code prohibits using the white one as a hot leg. That’s why 240V cable of the same AWG is red/black/green. The red & black legs both carry 120V.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 6 points 1 year ago (1 child)

    Code allows painting the white conductor black which is what i do. Or at least it did 10 years ago when I last checked.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 3 points 1 year ago

    This.

    That said, it's rare that only one or two outlets in a garage are tied to a breaker. Usually they're all on one circuit in older homes, in my experience.

    If you can find a circuit like this, though, it's perfectly valid. Many chargers made for 110V also have a 230V/15 or 20 amp mode. My Mother-in-law's portable charger has a 230V NEMA 2-20 adapter that comes in the bag with it.

  • permalink
  • fedilink
  • source
  • parent