[–] 14 points 3 months ago* (last edited 3 months ago)

This is good data, but unfortunately the write up obfuscates it, and is seemingly AI generated. If you prefer not to spend the time on a write up, I recommend you just publish the data table only. The write up did not add any substance to your otherwise great work.

  • source
  • [–] [S] 2 points 3 months ago*

    That's part of my frustration actually - I can't find a useful manual for this thing. Just marketing materials, basic setup guides, and specs of what comes with it. The Terramaster site says that it is only compatible with RAM that they sell, but I assume that is just because they want you to buy their stuff.

    No beep on any of the 32gb sticks I've tried. When booting with the 8GB stick it comes with, I get one beep.

  • source
  • parent
  • context
  • [–] [S] 1 point 3 months ago

    I did notice that in my research while I was troubleshooting this, but I was hopeful that maybe Terramaster had some sort of configuration to allow 32gb support since they claimed it. 16gb should be enough for my current purposes, but I am a little bummed about not being able to do 32.

  • source
  • parent
  • context
  • [–] 1 point 3 months ago (1 child)

    What is the exact memory spec that is supported? It should be in the manual. The spec of the working and not working sticks would be helpful too.

    If it beeps, does it beep a pattern, and is that also covered in the manual?

  • source
  • [–] 2 points 3 months ago (1 child)

    Wow, that downvote ratio is brutal.

    I suppose we’re at the second stage now.

    I hope the downvotes realise people like Rick will simply stop telling you they used LLMs, which will lead to stage 3.

    If people cared as much about how things were made consistently, perhaps our phones wouldn’t be made in Asian sweatshops with suicide netting.

  • source
  • [–] 1 point 3 months ago

    This looks WILDLY similar to my old setup! If you've got really old RG59 in there, it's going to suck - horrible jitter, and sub-1gig for sure, and obviously the longer the run the worse it gets.

    If you throw 2.5 Gbps adapters on to a nice clean piece of new RG6 though, especially point to point (but then you'd lose this boost), it is not terrible.

    In the end it was just a stopgap, I think I used it for about 5 years and then the first time I was having work done and had some parts of the walls open I got my guy to run fibre everywhere he could, and cat8 everywhere else. I do still use one of the RG59 links, just joined at that panel, to do a point to point from an upstairs bedroom, down through the basement and back up to the living room, just carrying super low volume corosync traffic for one of my lab clusters - but all the rest is migrated off now and is a way less frustrating connection now.

    I may reuse one of the good RG6 through cinderblock pieces to do RS485 between my ERV and my Home Assistant Yellow at some point in the future, but for the most part the coax is now abandoned (and we flipped the house to fibre internet years ago too.)

  • source
  • [–] 9 points 3 months ago (1 child)

    MoCa adapters are a decent option if running new cable is difficult, but 10 gig adapters still aren't available.

    If you want 10 gig, run fiber, not CAT6. Twisted pair uses a lot of power. Fiber uses less than a watt per port and is future proof.

  • source
  • [–] 3 points 3 months ago

    I looked at using moca for some things before, the spec supports 10gb, but I could only find adapters up to 2.5. My main questions for you is what effort vs performance do you want. Moca adapters are $50ish each, how many endpoints do you expect and are you ok with 2.5gbs or less at each?

    Also worth noting, moca is right now 2.5gbps on the line half duplex, which is much slower than 10gbps full duplex per broadcast domain of a Ethernet cable

  • source
  • [–] [S] 2 points 4 months ago*

    I've heard of Kanidm but not of void auth. From what I've read in their websites, Kanidm has more features, and since it's programmed in Rust, I'm biased to using it, so that I can contribute back to the repo later on. I'm not yet sure which one to migrate to so I'll probably deploy a demo of each and see which one suits my case better. Thank you :)

  • source
  • parent
  • context
  • [–] [S] 2 points 4 months ago

    i used to be ok with the trade-offs, but it's no longer feeling safe. i even paid for the plan for a long time, but i'm not looking back. forgejo and renovate are more performant and featureful. total win :-)

  • source
  • parent
  • context
  • [–] 2 points 4 months ago* (1 child)

    We use renovate for dep updates (for lemmy-ui), and a self-hosted woodpecker CI for lemmy.

    CI is imo the more dangerous way people are linking their projects to github.

  • source
  • [–] 2 points 4 months ago*

    I've been running a relatively simple setup with forgejo and renovate tracking docker-compose/podman yaml files which has largely been unproblematic. Although I have been really struggling to configure renovate to properly find updates for forgejo's own containers that are hosted on codeberg. If anyone is having renovate pull in image updates for forgejo on codeberg I'd really appreciate any pointers

  • source
  • [–] 3 points 4 months ago (1 child)

    So I haven't tested this specific example (but it should work):

    "packageRules": [
        {
          "matchDatasources": ["docker"],
          "matchPackageNames": ["ghcr.io/netbootxyz/netbootxyz"],
          "versioning": "regex:^(?<major>\\d+)\\.(?<minor>\\d+)\\.(?<patch>\\d+)-nbxyz(?<build>\\d+)$"
        }
      ]
    

    Netboot.xyz has its docker images tagged in a non-standard way necessitating a custom package rule so that renovate bot can properly pick up updates. I thought this went into the config.js that renovate bot uses for its own configuration but no it goes in your repo's renovate.json file like so:

    {
      "$schema": "https://docs.renovatebot.com/renovate-schema.json",
      "extends": [
        "config:recommended"
      ],
      "packageRules": [
        {
          "matchDatasources": ["docker"],
          "matchPackageNames": ["ghcr.io/netbootxyz/netbootxyz"],
          "versioning": "regex:^(?<major>\\d+)\\.(?<minor>\\d+)\\.(?<patch>\\d+)-nbxyz(?<build>\\d+)$"
        }
      ],
      "assignees": [
        "UntouchedWagons"
      ],
      "reviewers": [
        "UntouchedWagons"
      ]
    }
    
  • source
  • parent
  • context
  • [–] [S] 2 points 4 months ago

    i've not setup notifications. my forgejo does that for me, which i'm running podman style. since i live in a van, i host my stuff on hetzner and i'm trying to see how much i can do on one of their smaller instances ;-) so, i'm not running in constantly. a systemd timer runs it over night. otherwise it was very much doing a lot of heavy re-scanning.

  • source
  • parent
  • context
  • [–] 5 points 4 months ago (3 children)

    I use renovate bot for my self-hosted forgejo. It works pretty well but I think the documentation could be better. I had some settings in my config.js that was supposed to go into my repo's renovate.json and I had no idea

  • source
  • view more: ‹ prev next ›