Hello Lemmings,

I have a Legator Ghost 7FP and I am looking for some help on deciding on what strings to go with.

Some specs: Scale Length: 25.5" - 27" Multiscale Fingerboard Radius: 16"

I am looking to play this in Drop Ab/G# (Low to High: G# D# G# C# F# A# D#)

I can of course provide more information in order for help; but I have always used D'Addario NYXL1164 11-64

Any advice, suggestion, or help appreciated.

Greetings lemmings

I can't seem to find a verdict on the use of syncthing fork these days.

I know there was turmoil around the repo owner changing hands, and the lack of communication around it.

Looking to see what folks are using these days for Syncthing on android.

Any and all info on this welcomed!

Greetings Lemmings,

I realize that self-hosting for many is just a hobby. Something they do for fun. And the topic of today is usually a "not-so-fun" part of the IT industry.

I have for so long just let my lab grow organically. And months down the road an issue pops up with a service, and I have no idea how I set something up, and may not have documented it. Whether that be comments inside of configuration files, or via other means.

I have gotten marginally better at documenting within the config files or code that I am writing. However, I don't want just that as an option. So I spun myself up a Bookstack container.

I am slowly going through and creating what would amount to a full blown wiki for my setup. Doubly I can use this as part of my resume.

So I ask of you; what ways do you prefer to document? How do you keep yourself honest, and actually stick to it.

Edit: I created bash scripts that are run by a systemd service and timer. At least for my docker box.

Greetings Lemmings!

I am not new to self hosting; been at it for a few years. And I have neglected a very important part of my home lab; MUSIC!

So I stream music from Navidrome to all of my devices.

My music library has grown organically over the years, for probably the past 17 years. And a few times I had manually organized and fixed up some of the tags. But ultimately I ended up with a mess of a library.

I am working on cleaning that up. Though I absolutely should have cleaned it up before I created 2 backup scripts.

In short, I have a script that is called from a systemd service on a timer that runs my backup script that essentially more or less uses rsync to mirror the files in LiveMusicDir to MusicArchive1. This happens on my docker host where my Navidrome lives. The Music is on an NFS share hosted outside of the docker host.

The next step I run another similar setup on my desktop; systemd service running a script on a timer that uses rsync and other dependencies to track changes.

What I plan to do is organize the source. I am using beets, and learning as I go.

What methods do you use for managing a large music library?

cross-posted from: https://lemmy.zip/post/65150886

Greetings everyone,

I know many folks have wanted to use 8Bitdo controllers on linux, and that includes the Ultimate Software.

I use the 8Bitdo Ultimate 2 controller on my Arch install. And I had been wanting to check for firmware updates, and was doing some searching and couldn't find anything that could help me.

I found out that I can run that software through Lutris with minimal configuration.

1. Open Add game dialogue box
2. select "Add locally installed game"
3. Filled out Name under Game info, and selected Runner (Wine)
4. Game options tab I selected the executable, selected Working directory, and set Wine prefix path
5. Runner options I used GE-Proton (latest)
6. Launched

I want to note; unsure if you would have to, but I have udev rules added:

ACTION=="add", ATTRS{idVendor}=="2dc8", ATTRS{idProduct}=="6103", RUN+="/sbin/modprobe xpad", RUN+="/bin/sh -c 'echo 2dc8 6103 > /sys/bus/usb/drivers/xpad/new_id'"
ACTION=="add", ATTRS{idVendor}=="2dc8", ATTRS{idProduct}=="310b", RUN+="/sbin/modprobe xpad", RUN+="/bin/sh -c 'echo 2dc8 310b > /sys/bus/usb/drivers/xpad/new_id'"

Hope this helps someone.

Edit:

I want to add I am also using xpadneo-dkms from the AUR.

Greetings everyone,

I know many folks have wanted to use 8Bitdo controllers on linux, and that includes the Ultimate Software.

I use the 8Bitdo Ultimate 2 controller on my Arch install. And I had been wanting to check for firmware updates, and was doing some searching and couldn't find anything that could help me.

I found out that I can run that software through Lutris with minimal configuration.

1. Open Add game dialogue box
2. select "Add locally installed game"
3. Filled out Name under Game info, and selected Runner (Wine)
4. Game options tab I selected the executable, selected Working directory, and set Wine prefix path
5. Runner options I used GE-Proton (latest)
6. Launched

I want to note; unsure if you would have to, but I have udev rules added:

ACTION=="add", ATTRS{idVendor}=="2dc8", ATTRS{idProduct}=="6103", RUN+="/sbin/modprobe xpad", RUN+="/bin/sh -c 'echo 2dc8 6103 > /sys/bus/usb/drivers/xpad/new_id'"
ACTION=="add", ATTRS{idVendor}=="2dc8", ATTRS{idProduct}=="310b", RUN+="/sbin/modprobe xpad", RUN+="/bin/sh -c 'echo 2dc8 310b > /sys/bus/usb/drivers/xpad/new_id'"

Hope this helps someone.

Edit:

I want to add I am also using xpadneo-dkms from the AUR.

Greetings homelabbers,

I have been running a bunch of my homelab on docker, on a fedora server box for quite some time. And wanted to gauge how much of a security risk it is for me to expose the docker socket directly to containers. Is this really a huge issue when my homelab is not exposed to the internet?

The reason this question came up for me was because I cannot seem to get Docker Socket Proxy (https://github.com/Tecnativa/docker-socket-proxy) setup and working for Homepage, even following the recommendations from their guide (https://gethomepage.dev/configs/docker/#using-docker-socket-proxy)

I suppose this is mix of a discussion post, and requesting some help/guidance.

Thank you all! Hellmo

Greetings Lemmings,

I am not sure when touchscreen/tablet mode stuff was enhanced with KDE, I am guessing somewhere between 6.4.x and 6.6.x but I am quite pleased with this.

I couldn't find a good touchscreen compatible keyboard for the random times I used my Lenovo Yoga in touch mode, but somewhere along the way KDE was updated with some enhancements to touch mode.

I didn't know it until today that screen rotation was not an issue for my tablet mode either. I discovered it completely by accident.

Prior to this I had written a script I mapped to a hotkey to rotate the screen before switching to tablet mode.

This was such a wonderful surprise, so for anyone else looking to use KDE with their touch compatible devices I highly suggest trying it again.

I am always tinkering with my setup. Isn't that that normal for many linux users, especially Arch users?

I have for many years used GRUB, and have touched on using systemd-boot. I ditched systemd-boot rather quickly because I wanted to be able to list snapshots within GRUB and was happy with that until one day I couldn't for the life of me get snapshots to restore upon loading one.

So I started looking around; and found Limine, limine-snapper-sync, and Liminie-mkinitcpio-hook

After finding those, I pulled out a spare machine to test doing a clean install with Limine and proceeded to install snapper, and the above packages for syncing, along with snap-pac. I found it quite easy to use. I even tested restoring a snapshot. It was flawless for my use case.

So I then converted my laptop from GRUB to limine, and then my gaming rig.

I am quite happy with it.

What bootloader do you use, and why?